Nibble - White Screen

Howdy!

We’ve assembled our Nibble and at the first verification step, we powered it on, it beeped, and the screen was white. We haven’t been able to get the screen to show anything other than completely white. We tried a variety of button presses, and now it doesn’t beep on startup, but I suspect we hit a menu option to turn that off.

We’re not super confident in our solder joints, but don’t want to spend forever trying to figure out what solder joint is wrong if it’s likely something else.

Any ideas?

Thanks!

Rob

It was a bad solder joint on the screen. We fixed it.

3 Likes