No power to screen Step 12

Richard_Campbell · January 1, 2020, 8:48am

So I just tried to test the screen in step 12 but it’s blank. I rechecked all my steps and they seem to be right. I even tested the battery

albertgajsak · January 2, 2020, 6:16pm

Hey, thank you for supporting MAKERbuino and I am sorry for the problems that you’re having.

Can you please send me a photo of the back side of the console as well and check whether the transistor and the voltage regulator are at the right places?

Richard_Campbell · January 4, 2020, 9:31am

albertgajsak · January 4, 2020, 10:02am

Hey, thank you for the photo. your soldering joints look good.

Can you please verify that the transistor and voltage regulator are at the right places?

Richard_Campbell · January 4, 2020, 1:48pm

They are the first thing I checked.

Richard_Campbell · January 4, 2020, 2:35pm

albertgajsak · January 4, 2020, 2:57pm

Hey,

Thanks for checking this and I am sorry that your console is not working.

Please, send us the console to our address:
CircuitMess,
Maksimilijana Vrhovca 11,
47000 Karlovac,
Croatia

We cannot help you remotely any further so I’ll personally fix your console and get it returned to you.

You only need to send us the circuit board in order to make the package as light as possible.

Thank you for your understanding!

Richard_Campbell · January 4, 2020, 2:58pm

Thanks! I’ll send it as soon as I can!

albertgajsak · January 4, 2020, 2:59pm

Thank you very much!